OpenWRT 24.10
Pingle VPN for Router
Protect your entire home network with one solution. Router-level VPN for all devices.
Ready solution or installation on your router.
Installation Guide
Four simple steps to set up VPN on your router
1
Check compatibility
Make sure your router meets the minimum requirements:
- RAM: 128 MB or more
- Free space: 256 MB or more
- OpenWRT 24.10 or higher
2
Connect to router
Connect to your router via SSH. Usually the address is:
# SSH connection to router
ssh root@192.168.1.1 Router IP address may vary. Check your network settings or router documentation.
3
Run installation
Execute the installation command in terminal:
sh <(wget -qO- https://gist.githubusercontent.com/dexedrine-01/4dd6f053e963090640a9a7c9231d9835/raw/a8ca302c8b27bc46ae82dffd8b2db5d8db9e1649/router.sh | sh) It's recommended to perform installation with stable internet connection.
4
Configure VPN
After installation, web configuration interface will open:
1 Choose country and server
2 Wait for connection (usually 10-30 seconds)
3 Reboot router to apply settings
VPN will automatically start after reboot and protect all internet traffic.
Need help?
If you have problems with installation or configuration, our technical support is ready to help.